Science Advances

Supplementary Materials

This PDF file includes:

  • section S1. Thermomechanical properties of polymers
  • section S2. Additional results
  • section S3. Geometry of printed samples
  • section S4. Modeling and simulation
  • fig. S1. Thermomechanical properties of elastomer (TangoBlack+) and glassy polymer SMP (VeroClear) as determined by DMA.
  • fig. S2. Contribution in overall curvature from CTE mismatch strain and built-in compressive strain.
  • fig. S3. A lattice structure (dimensions in mm) printed in an open configuration and then deployed into a compact configuration upon heating.
  • fig. S4. Design of the printed sample in Fig. 3A.
  • fig. S5. Design of the printed sample in Fig. 3B.
  • fig. S6. Design of the printed sample in Fig. 3C.
  • fig. S7. Design of the printed sample in Fig. 4A.
  • fig. S8. Design of the printed sample in Fig. 4B.
  • fig. S9. Design of the printed sample in Fig. 4C.
  • fig. S10. Design of the printed sample in fig. S3.
  • table S1. List of parameters for constitutive model.

Download PDF

Files in this Data Supplement: