Research ArticleMATERIALS ENGINEERING
Direct 4D printing via active composite materials
- Zhen Ding1,*,
- Chao Yuan2,3,*,
- View ORCID ProfileXirui Peng4,
- Tiejun Wang3,
- H. Jerry Qi2,† and
- Martin L. Dunn1,†
- 1SUTD Digital Manufacturing and Design Centre, Singapore University of Technology and Design, Singapore 487372, Singapore.
- 2The George Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA.
- 3State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace Engineering, Xi’an Jiaotong University, Xi’an 710049, China.
- 4School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China.
- ↵†Corresponding author. Email: qih{at}me.gatech.edu (H.J.Q.); martin_dunn{at}sutd.edu.sg (M.L.D.)
↵* These authors contributed equally to this work.
See allHide authors and affiliations
Science Advances 12 Apr 2017:
Vol. 3, no. 4, e1602890
DOI: 10.1126/sciadv.1602890
Vol. 3, no. 4, e1602890
DOI: 10.1126/sciadv.1602890
Zhen Ding
1SUTD Digital Manufacturing and Design Centre, Singapore University of Technology and Design, Singapore 487372, Singapore.
Chao Yuan
2The George Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA.
3State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace Engineering, Xi’an Jiaotong University, Xi’an 710049, China.
Xirui Peng
4School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China.
Tiejun Wang
3State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace Engineering, Xi’an Jiaotong University, Xi’an 710049, China.
H. Jerry Qi
2The George Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA.
Martin L. Dunn
1SUTD Digital Manufacturing and Design Centre, Singapore University of Technology and Design, Singapore 487372, Singapore.