Article Information
vol. 3 no. 9
Published By:
Online ISSN:
History:
- Received for publication May 24, 2017
- Accepted for publication August 16, 2017
Copyright & Usage:
Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC). This is an open-access article distributed under the terms of the Creative Commons Attribution-NonCommercial license, which permits use, distribution, and reproduction in any medium, so long as the resultant use is not for commercial advantage and provided the original work is properly cited.
Author Information
- Liheng Chen1,2,
- Jinze Dou3,
- Qianli Ma2,4,
- Ning Li5,
- Ruchun Wu2,6,
- Huiyang Bian2,7,
- Daniel J. Yelle2,
- Tapani Vuorinen3,
- Shiyu Fu4,
- Xuejun Pan5 and
- Junyong (J.Y.) Zhu2,5,*
- 1Key Laboratory of Biomaterials of Guangdong Higher Education Institutes, Department of Biomedical Engineering, Jinan University, Guangzhou, China.
- 2Forest Products Laboratory, U.S. Department of Agriculture Forest Service, Madison, WI 53726, USA.
- 3Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, Espoo, Finland.
- 4State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, China.
- 5Department of Biological Systems Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA.
- 6School of Chemistry and Chemical Engineering, Guangxi University for Nationalities, 188 Daxue East Road, Xixiangtang District, Nanning, China.
- 7Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing, China.
- ↵*Corresponding author. Email: jzhu{at}fs.fed.us
