Research ArticleENGINEERING
Characteristic boundaries associated with three-dimensional twins in hexagonal metals
- View ORCID ProfileShujuan Wang1,
- Mingyu Gong1,2,
- View ORCID ProfileRodney J. McCabe1,*,
- Laurent Capolungo1,
- View ORCID ProfileJian Wang2 and
- Carlos N. Tomé1
- 1Material Science and Technology Division, Los Alamos National Lab, Los Alamos, NM 87545, USA.
- 2Mechanical and Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE 68583, USA.
- ↵*Corresponding author. Email: rmccabe{at}lanl.gov
See allHide authors and affiliations
Science Advances 08 Jul 2020:
Vol. 6, no. 28, eaaz2600
DOI: 10.1126/sciadv.aaz2600
Vol. 6, no. 28, eaaz2600
DOI: 10.1126/sciadv.aaz2600
Shujuan Wang
1Material Science and Technology Division, Los Alamos National Lab, Los Alamos, NM 87545, USA.
Mingyu Gong
1Material Science and Technology Division, Los Alamos National Lab, Los Alamos, NM 87545, USA.
2Mechanical and Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE 68583, USA.
Rodney J. McCabe
1Material Science and Technology Division, Los Alamos National Lab, Los Alamos, NM 87545, USA.
Laurent Capolungo
1Material Science and Technology Division, Los Alamos National Lab, Los Alamos, NM 87545, USA.
Jian Wang
2Mechanical and Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE 68583, USA.
Carlos N. Tomé
1Material Science and Technology Division, Los Alamos National Lab, Los Alamos, NM 87545, USA.
